PinWooferTM – JJP Upgraded Pinball Speaker Pack
Adding our upgraded speakers to your existing PinWoofer system is a great way to improve your audio experience. However, note that upgrading speakers alone unlocks only about 25% of the potential of your title. To unlock the full potential, we recommend a full PinWoofer kit:
The PinWoofer Dual Voice Coil Cabinet Speaker is the premiere driver for your pinball machine.
Get more intensity out of your amplifier with this high sensitivity driver; the higher sensitivity offered can add boost your factory amplifier.
The ring is required so that the woofer does not contact the cabinet floor at higher volume intensity.
The speaker provided is wired into an 8Ohm configuration for use your factory amplifier. The bass sound quality of your machine will improve. However, if you are seeking a lot of bass boost, a PinWoofer Super Kit with Amplifier is strongly recommended.
This upgrade is for titles Dialed In!, Elton John, Pirates of the Caribbean, Willy Wonka and the Chocolate Factory, Wizard of Oz Yellow Brick Road Edition, Toy Story and Guns N' Roses only. This upgrade is not compatible with the original Wizard of Oz and The Hobbit.
Upgrade the factory 1/2" mylar dome tweeter to this 1", ferrofluid cooled, textile dome tweeter.
These upgraded tweeters are designed to smooth out the grind and distortion present in the stock tweeters.
A poor sounding tweeter can ruin the soundtrack. A good sounding tweeter not only makes the highs sound better but adds clarity by properly blending high frequencies into the lower frequency spectrum.
This tweeter is superior to the factory tweeters in every way!
For Guns N' Roses CE you will disable your backbox sound bar.
Installation requires a T-15 or T-20 Torx bit and driver plus a phillips head screwdriver.
Installation time is 10-20 minutes and is trivial; the tweeters are plug and play to the backbox connectors.
Includes i) two 43in strips of playfield glass tape, ii) one Dual Voice Coil Cabinet Speaker wired for 8Ohm, iii) Cabinet Mounting Ring (with hardware), iv) one pair of PinWoofer signature Tweeters, v) required mounting hardware.
Installation is simple, requiring only a few basic hand tools.