PinWooferTM – 4in SAM / Whitestar / Data East Backbox Speaker Mounting Spacer Set
Enjoy a sturdy, tried and true mounting solution to accommo-date a typical (protruding) tweeter assembly.
Slips over the existing threaded plate with four each, #6-32 x 1" studs.
Designed to work with the PinWoofer PW-525 speaker. For other speakers please verify your dimensions match the dia-gram. Most aftermarket speakers have a compatible mounting pattern diameter.
Includes i) two mounting spacers, ii) 4x #8-32 locking nuts and 4 #8 Flat Washers, iii) 8x #6-32x5/8in Binding Screws, iv) 8x #6-16x1in Hex Head Sheet Metal Screws, v) 4x #8-32x5/8” M/F Hex Mounting Posts for mounting to the existing 4in speaker panel.
This is a universal kit and should be adequate for any 4in mounting panel, but it is possible that some addi-tional hardware may be needed which is not necessarily provided in this kit.
(Speakers not included.)
PinWoofer products are warranted to be free of all defects in material and workmanship for 90 days from the date of purchase from an authorized PinWoofer dealer.
This warranty and all rights provided are limited to the original owner and are non-transferable. Responsibility is limited to replacement or repair as set forth in this warranty statement.
Should a product require warranty service during this period, PinWoofer will repair or replace without charge, any part or product proving defective in material or workmanship. All warranty repairs and service must be performed by an authorized PinWoofer technician or service facility. The use of non-authorized repair services renders this warranty null and void, and any charges relating to non-authorized repair are the responsibility of the product owner. All expenses (excluding shipping costs) related to replacing or repairing a defective part or product under this warranty shall be assumed by PinWoofer.
PinWoofer reserves the right to replace defective product with a new or factory reconditioned unit.
1.This warranty does not cover product failure or damage resulting from misuse, abuse, neglect, accidents, alterations, standard environmental deterioration, natural disasters, or improper use and/or installation or not following the installation instructions. “Blown” or damaged speakers (and tweeters) are a result of misuse and are not covered by this warranty.
2.This warranty does not cover cosmetic damage due to misuse or neglect. This includes paint damage, scratches, cracks or other superficial marks related to improper use.
3.Failures arising from attempted servicing of a non-authorized PinWoofer repair facility or technician are excluded from this warranty.
4.If the amplifier enclosure has been opened (or attempted to be opened) by a non-authorized PinWoofer technician any warranty is null and void.
5.If the fastener sealing decals on the amplifier have been removed, attempted to be removed or are damaged in a way that indicates the enclosure were opened or attempted to be opened, any warranty is null and void.
6.The use, addition or integration of any aftermarket peripheral device, enclosure, attachment, mounting device, modification (aka “mod”) or other accessory or enhancement, or any item physically or mechanically attached to or electrically interacting with any part of the PinWoofer system, that is not produced, validated, verified, approved and supplied by PinWoofer or a PinWoofer authorized dealer, renders this warranty null and void. Violation of these restriction will be confirmed and determined by PinWoofer.
LIMITATION OF DAMAGES
In no event shall PinWoofer be liable for consequential damages for breach of this warranty including installation charges, excessive shipping expenses, property loss or other incidental loss. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to the buyer.
HOW TO OBTAIN WARRANTY SERVICE
To obtain services under this warranty, the buyer shall contact PinWoofer at email address PinWoofer@PinWoofer.com to obtain a Return Merchandise Authorization number (RMA#) and a return shipping address. The buyer must carefully pack the warranted product along with a copy of the original purchase receipt, the Return Merchandise Authorization number, and a description to the repair facility you are directed to ship the return to. Warranty assistance can be obtained by calling 208-855-0346, M-F, 8am to 5pm Mountain Time.
NOTICE TO BUYER
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.