System11 12V options

image52

Early System11A

Pin*Bot 12V location in the backbox  is shown .  Your kit will ship with a 6' (2m) power cable that  can route from GRY-WHT (12V) and BLACK (GROUND) at the POWER SUPPLY Board 3J6 to the cabinet mounting location.  T-Tap into the POWER SUPPLY Board wires in the backbox and run the power pair to your amplifier.  Utilize the 5.5mm 12V Plug on the cabinet end of the power cable.

image53

Early System11B

 Swords of Fury 12V location in the backbox is shown.  Your kit will ship with a 6' (2m) power cable that  can route from WHT-GRY (12V) and BLACK (GROUND) at the POWER SUPPLY Board 1P17 to the cabinet mounting location.  T-Tap into the POWER SUPPLY Board wires in the backbox and run the power pair to your amplifier.  Utilize the 5.5mm 12V Plug on the cabinet end of the power cable. 

image54

Late System 11

Cabinet wiring harness can be utilized.  12V is GRY-YEL and GROUND is BLK-YEL. This was confirmed on Transporter the Rescue and most likely persists to later System11. Power Matrix will evolve - contact if you want assistance.